View LTD-2404SW-P_8912618.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lite-on dcc release lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto led displayproduct data sheetLTD-2404SW-P spec no.: ds30-2012-0095effective date: 02/22/2013revision: a bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 1 of 1 3 bns - od - c131/a4 led display lt d - 2 404 sw - p data sheet item description by date 1 new spec reo lin 2012/0 8 / 31 2 2.1 modify package dimensions in page 3 2.2 add packing drawing in page 11 reo lin 2012/10/03 3 modify plastic s burr spec. from 0.14 mm to 0.05 mm in pa ge 3 reo lin 2012/12/26
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 2 of 1 3 bns - od - c131/a4 features 0. 2 inch ( 5.08 mm) digit height continuous uniform segments low power requirement excellent characters appearance high brightness & high contrast wide viewing angle solid state reliabi lity categorized for luminous intensity smd display lead free package (according to ro hs ) description the lt d - 2404 sw - p is a 0. 2 inch ( 5.08 mm) digit height daul digit smd display. this device uses ingan white led chips ( ingan on a transparent substrate) and has a gray face and white segments. device part no. description ingan white common anode rt. hand decimal lt d - 2 404 sw - p
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 3 of 1 3 bns - od - c131/a4 package dimensions solder pad vs painting diagram n otes: 1. plastic pins burr max. 0. 05 mm 2. all dimensions are in millimeters. tolerances are ? 0.25mm (0.01) unless otherwise noted. 3. solder pad materials and thickness: cu: 1200 inch ni: min 150 inch au: 4 inch 10 1 20 11 1 20 10 11 r e fle c to r p c b s o ld e r p a d p a in tin g p la s tic b u rr 0 .0 5 m m m a x c u 1 2 0 0 in c h m in n i 1 5 0 in c h m in a u 4 in c h p a in tin g 4 0 0 in c h s ca le : 5 :1 0 .0 5 m m
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 4 of 1 3 bns - od - c131/a4 internal circuit diagram
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 5 of 1 3 bns - od - c131/a4 pin connection no. connection 1 cathode e 1 2 cathode d 1 3 common anode dig1 4 cathode c 1 5 cathode d p1 6 cathode e2 7 cathode d2 8 common anode dig2 9 cathode c2 10 cathode dp2 11 cathode b2 12 cathode a2 13 c ommon anode dig2 14 cathode f2 15 cathode g2 16 cathode b1 17 cathode a1 18 common anode dig1 19 cathode f1 20 cathode g2
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 6 of 1 3 bns - od - c131/a4 chip led absolute maximum rating parameter maximum rating unit power dissipation per segment 35 mw peak forward current per segment ( frequency 1khz, 10% duty cycle) 50 ma continuous forward current per segment 10 ma forward current derating from 25 0 c 0.28 ma/ c operating temperature range - 20 c to + 80 c storage temperature range - 40 c to + 8 5 c soldering conditions: 1/16 inch below seating plane for 3 seconds at 260 0 c . chip led electrical / optical characteristics at ta=25 o c parameter symbol min. typ. max. unit test condition average luminous intensity i v 45 180 mcd if = 5 ma note 1, 2, 5 viewing angl e 2 1/2 130 deg fig.6 chromaticity coordinates x 0. 294 if = 5 ma note 3, 5 fig.1 y 0. 286 forward voltage per segment v f 2. 55 3.15 v if = 5 ma reverse current per segment ( 7 ) i r 10 0 ? a vr=5v luminous intensity matching ratio (similar light ar ea) i v - m 2:1 if= 5m a note : 1. luminous intensity is measured with a light sensor and filter combination that approximates the cie eye - response curve. 2. iv classification code is marked on each packing bag. 3. the chromaticity coordinates ( x, y) is derived from the 1931 cie chromaticity diagram. 4 . caution in esd: static electricity and surge damages the led. it is recommend to use a wrist band or anti - electrostatic glove when handling the led. all devices, equipment and machiner y must be properly grounded. 5 . tester :
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 7 of 1 3 bns - od - c131/a4 cas140b is for the chromaticity coordinates (x, y) and iv. 6 . the chromaticity coordinates (x, y) guarantee should be added 0.01 tolerance 7. reverse voltage is only for ir test. it can not con tinue to operate at this situa tion.
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 8 of 1 3 bns - od - c131/a4 typical electrical / optical characteristic curves (25 o c ambient temperature unless otherwise noted)
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 9 of 1 3 bns - od - c131/a4 bin code list v f spec. table v f bin forward voltage ( v ) at if = 5 ma min. max. v1 2.55 2.65 v2 2.65 2.75 v3 2.75 2.85 v4 2.85 2.95 v5 2.95 3.05 v6 3.05 3.15 tolerance on each forward voltage bin is +/ - 0. 05 volt iv spec. table iv bin luminous intensity (mcd) at if = 5 ma min. max. p 45.0 71.0 q 71.0 112.0 r 112.0 180.0 tolerance on each luminous intensity bin is +/ - 15%. hue spec. table hue b in color bin limits at if = 5 ma cie 1931chromaticity coordinates s1 x 0.274 0.274 0.294 0.294 y 0.226 0.258 0.286 0.254 s2 x 0.274 0.274 0.294 0.294 y 0.258 0.291 0.319 0.286 s3 x 0.294 0.294 0.314 0.314 y 0.254 0 .286 0.315 0.282 s4 x 0.294 0.294 0.314 0.314 y 0.286 0.319 0.347 0.315 s5 x 0.314 0.314 0.334 0.334 y 0.282 0.315 0.343 0.311 s6 x 0.314 0.314 0.334 0.334 y 0.315 0.347 0.376 0.343 tolerance on each hue (x, y) bin is +/ - 0.01.
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 10 of 1 3 bns - od - c131/a4 smt soldering instruction ( number of reflow process shall be less th an 2 times, and cooling process to normal temperature is required between the first and the second soldering process ) note: 1. recommended soldering condition: reflow soldering (two times only) soldering iron (one time only) pre - heat: pre - heat time: p eak temperature: soldering time: 120~150 c. 120sec. max. 260 c max. 5sec. max. temperature soldering time 300 c max. 3sec. max. 2. number of reflow process shall be less than 2 times, and cooling process to normal temperature is required between the fir st and the second soldering process .
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 11 of 1 3 bns - od - c131/a4 rec ommended soldering pattern ( unit: mm) : packing dimensions : 1 . 10 sprocket ho le p itch cum ulativ e to lerance 0.20. 3 . m aterial : b lack c on du ctiv e p o ly styrene a lloy. 2 . c arrier cam b er is w ith in 1 m m in 2 50 m m . 4 . a ll d im en sio n s m eet e ia -481-d requirem ents. 6 . p ack in g leng th p er 2 2" reel : 50 .5 m eters. 7 . c o m p on en t lo ad p er 1 3" reel : 10 00 pcs. 5 . t h ickn ess : 0.30 0 .05m m .
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 12 of 1 3 bns - od - c131/a4 configuration of tape reel dimensions : ps 6 05 03 04 01 00 02 9 2 11 12 10 1 7 8 4 3 6 5 330.02.0 100.00.5 29.4 +1 -0.5 24.4 +2 -0 13.0 + 0.5 -0.2 2.0 + 0.5 -0 120 21.00.5
lite - on technology corpor ation property of lite - on only part no.: lt d - 2 404 sw - p page: 13 of 1 3 bns - od - c131/a4 moisture proof packaging all n/d smd displays are shipped in moisture proof package. the display s should be stored at 30c or less and 90% rh or less. once the package opened, moisture absorption begins. ba king conditions i f the parts are not stored in dry conditions, they must be baked before reflow to prevent damage to the parts. package temperature time in reel 60 o c R o c R o c R baking should only be done on ce. units in a sealed moisture - proof package package is opened (unsealed) environment less than 30 o c, and less than 60% rh? perform recommende d baking conditions baking is not necessary package is opened more than 1 week days? yes no yes no

▲Up To Search▲

Price & Availability of LTD-2404SW-P

	To Download LTD-2404SW-P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .